Share on facebook
Facebook
Share on twitter
Twitter
Share on linkedin
LinkedIn

Huawei OptiX Metro 2050

Send us the Part Number and the quantity, then receive our quotation. Simple! Email: office@zyhoto.com Tel: +86-020-82312822 Wechat/ Whatsapp: +8613560448466

Response Within 24 Hours

Optix Metro 2050 is an STM-1/STM-4 standard multi-service hybrid transmission equipment, which is mainly used in the metropolitan area network and local network access layer of each college network system.
Metro 2050 has the largest cross-connection capability and service access capacity in similar products, which can easily manage the transmission network capacity and bandwidth, and fully meet the construction needs of the increasing development of data services. Structural system Metro 2050 equipment adopts ETSI standard cabinet, which is designed to insert board for the subrack. The size of the subrack is 500mm “530mm” 264mm. It can provide three types of cabinets: 2000 mm/2200 mm/2600 mm (height), 600 mm (width), 300 mm (deep), and up to two subracks that can be installed in one cabinet.

Support for packet switching and transmission
Provides packet planes, supports packet switching and transmission, and supports TDM and packet clock transmission technologies. Small in size.

Low power consumption
The box size is 436mm × 293mm × 86mm (W × D × H), height is 2U). Under typical configuration, the power consumption is less than 50W, and it can be directly connected to-48V, + 24V, ~ 110V/220V power supply.
Rich business interfaces.
SDH service interface.
PDH service interface.
Data service interface.
Voice service interface.
Dedicated line service interface.
SHDSL interface.
Complete optical interface series.
Various specifications of the STM-1 optical interface.
Various specifications of the STM-4 optical interface.

Rich auxiliary interfaces
Make use of its powerful overhead processing ability to provide users with several data interfaces:
Two-wire analog telephone interface to provide business contact between regenerative / multiplexing segments.
User-customizable transparent data interface.
Switch input and output interface.
10m Ethernet network management interface.
RS-232 power monitoring interface.

Flexible configuration
The configuration of OptiX Metro 2050 is quite flexible. Each network element can be configured not only as a single STM-1/4TM or ADM system, but also as a multi-ADM system with a combination of STM-1 and STM-4 interfaces, and can realize cross-connection between multiple systems; when accessing data services, the transmission bandwidth and Ethernet ports can be flexibly configured according to the bandwidth needs of users, and can also meet the needs of users for increased bandwidth without adding ports and veneer.

Flexible networking
OptiX Metro 2050 can provide a variety of networking methods and support a variety of network topologies, including point-to-point, chain, ring, ring chain, intersection ring, tangent ring, mesh shape, and so on.

Perfect protection
OptiX Metro 2050 supports a variety of network-level protection methods, including MSP protection, SNCP protection, PP protection and shared fiber virtual path protection, clock protection, power unit 1-to-1 protection, and other device-level protection.

Flexible DCC transmission mode
It can transmit the DCC information of our equipment through the external clock port; it supports DCC to transmit the network management information of other companies’ transmission equipment; it can also connect the network management interface to the Ethernet interface board to transmit the network management information.

Fully functional network management system
OptiX Metro 2050 and OptiX series products use a unified network management platform for centralized operation, maintenance and management of (OAM), circuit configuration and scheduling to ensure the safe operation of the network.

Excellent SSM management function
The OptiX Metro 2050 network element clock has a complete SSM management function. The external synchronization port can directly receive the synchronization information of the external timing device, and the output port also has an SSM, and can flexibly set the bit of the SSM in the external 2048kbit/s signal, and the SSM information of the external input 2MHz signal can be manually set, which is easy to dock with the equipment of other manufacturers. In addition, the SSM threshold of each network element can be set to facilitate the management of the synchronization network.

Excellent clock synchronization performance
The advanced high-precision crystal is used as the internal oscillation source, and a special clock processing chip is used to ensure that its technical specifications fully meet the requirements of ITU-T G.813 recommendation. The timing system can work in tracking mode, holding mode and free oscillation mode. The timing system can provide SSM function. When working in tracking mode, one of the lines, branches, and external clock synchronization sources can be selected as the reference clock source; through the clock selection function of various priority levels, the reliable operation of the network timing system can be ensured.

Product model and name
OptiX155/622M assembly rack and hardware board.
Telephone complete set-business phone-milky white-twin crystal / 6P2C American plug-environmental protection-Chinese materials-self-adhesive / screw two fixation methods.
TOOLS supporting tools-SDH installation kit-Chinese and English materials-with configuration table.
SS14PD1B (12024) made board-OptiX 155/622-SS14PD1B01-32mm 2m 120 ohm branch board-24mm handle bar-1mm 1.
SS14PL1A (75 24) made board-OptiX 155/622-SS14PL1A01-1602M 75 ohm branch board-24mm handle bar-1mm 1.
SS31TPS0 finished board-Optix 155622tel SS31TPS0-branch protection switching board.
SS33SL2 (Smur1.1 SC 32) finished board-Optix 155622-SS33SL202-2xSTM-1 optical interface board (SME 1.1 SC 32mm).
SS15SL1 (Smur1.1 SC 24) finished board-OptiX 155/622-SS15SL103-STM-1 optical interface board (Smuri 1.1 and SCMagi 24mm).
SS15SL1 (Lmur1.1 SC 24) finished board-OptiX 155/622-SS15SL105-STM-1 optical interface board (Lmuri 1.1 Magi 24mm).
SS13SCC0 finished board-OptiX 155gamma 622muri SS13SCC0-main control board.
SS32OHP01 finished board-Optix 155622murSS32OHP01-overhead processing board (24mm).
SS16SL1A (Lmur1.2 FC 24) finished board-OptiX 155/622-SS16SL1A01-STM-1 optical interface board (Lmure 1.2 FC FCMagi 24mm).
SS33SE2A (32) finished Board-Optix 155622-SS33SE2A01-2xSTM-1 Electrical Interface Board (32mm).
SS14STG01 finished board-OptiX 155Compact 622MuthSS14STG01-clock board.
SS14SLEA (24) finished Board-OptiX 155/622-SS14SLEA02-STM-1 Electrical Interface Board (24mm).
SS11ET101 finished Board-OptiX 155/622-SS11ET101-4 Port 10M/100M Ethernet Electrical Interface Board.
SS27SL4A (Smur4.1 SC 32) finished board-OptiX 155/622-SS27SL4A01-STM-4 optical interface board (Smuri 4.1 Magi SCMagi 32mm).
SS28SL4A (Lmur4.1 FC 32) finished board-OptiX 155/622-SS28SL4A02-STM-4 optical interface board (Lmure 4.1 Magi FCMagi 32mm).
SS29SL4A (Ve-4.2 FC 32) finished board-OptiX 155/622-SS29SL4A01-STM-4 optical interface board (Ve-4.2,FC,32mm).
SS13GTC01 finished board-OptiX 155gamma 622murSS13GTC01-crossover board (no crystal oscillator, 24mm).
SS11ET102 finished board-OptiX 155/622-SS11ET102-4 port 10M/100M Ethernet electrical interface board-supports layer 2 switchings.
SS28SL4A (Lmur4.2 FC 32) finished board-OptiX 155/622-SS28SL4A03-STM-4 optical interface board (Lmury4.2 FC 32mm).
SS11EFTE01 finished board-OptiX 155/622-SS11EFTE01-4 port 10M/100M Ethernet electrical interface board-transparent transmission.
SS11EFTO01 finished board-OptiX 155gamma 622murSS11EFTO01-single mode 15km 4port 100m Ethernet optical interface board-transparently transmitted